- Free EstimatesWritten quote, no obligation
- Fully InsuredGeneral liability & workers’ comp
- Workmanship Warranty18-month workmanship warranty
- Financing AvailableThrough Hearth, 550+ credit
- As Seen on HGTVPart of the 76 Fence Houston family
Short answer: No single material wins on every count here. Ornamental aluminum handles damp air and lakeside exposure best, open metal and chain link handle wind best, and cedar on well-set posts is still the best value for full privacy. The ground under a fence decides its life as much as the material on top.
Four things our weather throws at a fence
- Sun and heat. At the Conroe station, the closest long-term record to most of our jobs, NOAA's 1991–2020 climate normals put the average July high at 94.9°F and August at 95.8°F. That fades stain, dries out wood, and makes vinyl expand and contract through the day.
- Long wet spells. The same normals give about 51 inches of rain a year, with May, June, and October each averaging more than 5 inches. Rain often arrives in bunches and keeps the bottom of a fence damp for days.
- Storm wind and falling limbs. Tropical systems and spring storms push on solid panels, and on wooded lots a dropped pine limb does more damage than the wind itself.
- Sand over clay. The USDA's Conroe series description, the county's most common soil, shows loamy fine sand on top and slow-draining clay with ironstone starting about 23 to 43 inches down. Sand gives a post little side grip, and water can sit on that layer inside a post hole.
Material by material
Prices are typical installed ranges per linear foot from our pricing guide, not quotes.
| Material | Per foot | Handles well | Watch for |
|---|---|---|---|
| Cedar | $30–$47 | Rot and insects better than pine; good privacy value | Graying and checking without stain every few years |
| Pressure-treated pine | $25–$35 | Lowest-cost wood privacy; takes stain well | Twisting and cupping as it dries in summer |
| Vinyl | $25–$70 | Moisture, rot, insects; no painting | Heat movement if rails are pinned tight; impact cracks. Thicker vinyl costs more but resists sagging and cracking in heat. |
| Composite | $100–$175+ | Humidity and rot with a wood look | Weight on posts; color lightening in the first months |
| Aluminum | $40–$100 | No rust; pool chemicals and lake air; wind passes through | Can pit over time; less strength than steel for a hard impact |
| Powder-coated steel | $40–$100 | Strength and security; wind passes through | Rust at scratches that aren't touched up |
| Chain link | $18–$40 | Wind, cost, long runs | Vines pulling the fabric; loose tension at terminal posts |
| Field and no-climb wire | Priced on site | Long acreage lines | Corner braces that loosen after wet seasons and storms |
Your deed restrictions may choose for you
Before weighing weather, check what your neighborhood allows. Ranch Crest's Sections III and IV allow wood, brick, wrought iron, and vinyl but not chain link or wire, and wood there may be sealed but not painted. Westwood's 2016 guidelines allow wood, chain link, wrought iron, or vinyl, and its original Section 2 restrictions say wood fences must be painted or stained. In Woodforest, a replacement fence has to be similar in material and design to the original. Our HOA approval guide covers the paperwork.
Matching the material to the property
On acreage outside Magnolia and Pinehurst, the usual mix is wire across the pasture, rail along the road, and wood or vinyl privacy only near the house. Wire fences live or die by their corners, so put the money into H-braces before a heavier wire; our farm and ranch materials page covers the options.
Along the west shore of Lake Conroe, in Bentwater, April Sound, Walden, and their neighbors, damp air off the water and sprinkler overspray favor aluminum, and the view rules usually do too. On subdivision lots where privacy is the point, a well-built cedar fence remains the most common answer. Under heavy pine and oak shade, as in Cimarron Country or Clear Creek Forest, wood stays damp longer and termites find it easier; see our termite guide. Our wind page covers which styles shed a gust and which ones catch it.
What no material can make up for
Most of the fence failures we're called to fix start at the posts, not the pickets or panels. We set every post in concrete, a minimum of 24 inches down with 80 lb in each hole on a wood fence, adding depth for taller fences and wherever we hit loose sand or a hole that fills with water. Posts that hang a gate or turn a corner go deeper still, sized to the gate and the soil. Our wood fences also get three rails, a 6-inch rot board, Simpson brackets, and hot-dipped galvanized ring-shank nails. Our post-setting guide for local soil explains how we decide hole by hole.
Quick answers
Does the humidity rust a steel fence?
Powder-coated steel holds up well as long as chips and scratches get touched up, since rust starts at bare metal. Aluminum doesn’t rust at all, though it can pit over time, which is why we often suggest it near the lake or a pool.
What's the lowest-upkeep fence for a shady, wooded lot?
Vinyl, aluminum, or composite, because none of them rot when needles and leaves hold moisture against the base. Plan on rinsing off mildew once or twice a year.
Is composite fencing just plastic?
No. Composite is made from wood fiber and plastic resin, which gives it a wood-grain look without staining. It’s the most expensive option on our pricing guide, at $100 to $175 or more per foot installed. See composite and Trex.
Ready for a free estimate?
Call or text us, or book a time for us to walk your property and give you a written quote.