Home / FAQ

FAQ · 3 min read

Do I need to call 811 before a fence goes in?

What Texas law says about digging post holes, how the locate timing works, and the buried lines on acreage and lake lots that nobody comes out to mark.

By the 76 Fence of Magnolia team · Updated

Short answer: Yes. Texas law requires a locate request before mechanized digging, and power-auguring fence post holes counts. We request it before every new fence we install, and the crew waits until the marks are down before the first hole goes in.

What Texas law counts as digging

The rules live in Chapter 251 of the Texas Utilities Code. It defines excavation as using powered or mechanized equipment, augers included, to disturb soil 16 inches deep or more. Our wood-fence post holes go at least 24 inches, and gate and corner holes go deeper, so a new fence is squarely covered. Texas811 lists fence projects among those that need a request, even in your own backyard.

How the timing works on a Magnolia job

Under Section 251.151, the request has to go in at least 48 hours before digging, not counting Saturdays, Sundays, or legal holidays, and no earlier than 14 days ahead. In practice we place it after the layout is settled and before the install date, so the window lines up with the crew's schedule.

  • A request made on a Thursday clears for digging at the same hour the following Monday, or Tuesday if Monday is a legal holiday.
  • The statute treats Saturday differently: a Saturday request clears at 11:59 a.m. the following Tuesday, or Wednesday if Monday is a holiday.
  • If rain, a permit, or an HOA review pushes the start more than 14 days past the request, we file a new one. That happens more than people expect when a City of Magnolia permit and an architectural committee review are running at the same time.
  • If marks disappear before we dig, we ask for a refresh rather than guessing.

Once the flags are out, we hand-dig near any mark. A common practice is to treat 18 inches on each side of a mark as a hand-dig zone; Texas811's excavator FAQ describes that as an industry best practice. A post can usually shift a few inches along the line to stay clear.

Lines 811 won't find on acreage and lake lots

Chapter 251 doesn't apply to an underground line that serves only the owner and sits entirely on the owner's property (Section 251.003). In plain terms, a utility marks what it owns, which generally stops at the meter. Anything that runs from there onto your land is yours, and on the properties we work around Magnolia that can be a lot of buried line:

  • Electric run out to a barn, shop, well pump, or RV pad
  • Water lines to stock tanks and hose bibs at the far end of a pasture
  • Septic tanks, field lines, and aerobic spray systems. In High Meadow Estates, for example, there's no MUD and lots typically use septic.
  • Power to a boat lift, dock lights, or a pool on a west Lake Conroe lot
  • Sprinkler mains, landscape lighting, and wiring for an existing gate opener

Water and sewer lines have their own wrinkle. The statute requires operators of Class A facilities, such as gas and electric lines, to participate in a notification center (Section 251.107). Water and sewer are Class B, and that duty doesn't extend to them. If a MUD or small water company serves your street, as Montgomery County MUDs 8 and 9 do in Walden, a separate call can be worth it. For private electric or water runs, a private locating service can mark them for a fee.

What helps before we arrive

Walk the fence line and flag anything you know is buried, even if you're not sure how deep it runs. Tell us about old trenching you remember, a shop that was wired after the house was built, or a spot where the grass grows in a strange straight line. On acreage, point out the well house and where the septic field drains. If you aren't sure where your corners are, sort that out first; our property survey FAQ covers finding pins. Then leave the 811 paint and flags alone until the posts are set.

You can see where the locate fits in the rest of the job on our process page, and our acreage fencing page covers how we lay out long runs. If you're comparing contractors, ask each one who places the request; it's on our hiring checklist.

Quick answers

If you're building my fence, do I have to place the 811 request myself?

No. When you hire a contractor to dig, the contractor is responsible for the locate request. We place it before every new fence installation, and you’re welcome to ask us for the ticket number.

Can I mow over the flags before the fence is built?

Try not to. If paint or flags get mowed off or washed out before we dig, the marks have to be refreshed, which can push the start date back a couple of days.

Does 811 mark my septic system or aerobic sprinkler heads?

No. Septic tanks, field lines, and aerobic spray heads belong to you, so they aren’t part of an 811 locate. Show us where they are, or have a private locator mark them.

Do I need to be home when the locators come?

No. Texas811 says you don’t have to be on site for marking as long as the utility companies can get to the area. On a gated acreage tract or behind a locked side gate, leave access open or let us know so we can plan around it.

Keep reading

FAQ

Do I need a property survey before building a fence?

Which lots around Magnolia can build from existing pins, which ones need a surveyor first, and what changes when the back of the lot meets Lake Conroe.

Read more →
FAQ

What should I check before hiring a fence contractor?

Two bids for the same fence can describe very different builds. Use this list to line them up side by side before you sign anything.

Read more →
Page

Our Fence Installation Process — Magnolia, TX

Read more →

Ready for a free estimate?

Call or text us, or book a time for us to walk your property and give you a written quote.